news

한어Русский языкEnglishFrançaisIndonesianSanskrit日本語DeutschPortuguêsΕλληνικάespañolItalianoSuomalainenLatina

If we buy the right bed, it will bring us a very comfortable experience every day; if we buy the wrong one, it will really be very awkward.

But there are many types of beds on the market, so how should we choose?

To this end, based on the lessons of many people, we have summarized 7 types of beds that you should not buy.

Why are no one buying these 7 types of beds that Qijia Anan introduces to you today? You won’t be surprised after reading their shortcomings.

Do you know which 7 types of beds are suddenly no longer in demand?

1. Floor-standing box bed

The so-called floor-standing box bed means that there is a closed box under the mattress of the bed, and the four sides of the box are on the ground in our home.

Therefore, a characteristic of the floor-standing box bed is that the internal space is closed and the surrounding areas are on the ground.

The main reasons why floor-standing box beds suddenly no longer have anyone to buy are as follows:

1. It is troublesome to use.Every time you store something in the box, you have to take off all the mattress and quilts on top. It's impossible for one person to do it, which is very inconvenient.

2. Prone to mold.Because the interior of the box is completely sealed, some of the clothes we put inside had a musty smell when we took them out.

3. Easy to break.Because its support is based on the panels around the box, and if these panels are not connected well, you will find that the bed will fall apart.

So, after considering these issues, suddenly no one bought this kind of bed because it was really not easy to use.

2. Flat Box Bed

The flat box bed mentioned here refers to a flat plate with the upper part of the box below as a cover.

This kind of flat board is actually a large piece of wood, and it is also used as a bed board.

So the flat box bed is actually very similar to the box bed with four sides landing on the ground.

Flat bed may bring us the following problems:

1. It is also very troublesome to take items.You also need to remove all the mattress, sheets and quilts, and then pick up the flat plate, which takes a long time every time.

2. The air quality inside is also poor, which makes it prone to mold.This is exactly the same as the floor-standing box bed on all sides. Some of the items we store in it will become moldy over time.

3. Not strong.Because the lower part of the bed usually has only a few supports, the purpose is to store items, and there is only a board on top. In fact, it is not strong and easy to break.

Therefore, few people buy flat bed boxes because they have many problems in many aspects. Coupled with the emergence of hydraulic bed, they are eliminated faster.

3. Simulation leather bed

In fact, the so-called simulated leather bed is simply an artificial leather bed.

The main places where artificial leather appears are generally the soft padding of the headboard and the bed sides.

What we see is that the headboard, bed sides or foot of the bed are all made of leather.

However, since real leather is more expensive, most of the products are imitation leather.

This kind of artificial leather bed is suddenly no longer bought. The main reasons are as follows:

1. Not environmentally friendly.Some imitation leather beds will emit a pungent smell, which is the smell of these cheap leathers. We sleep every day, which will cause many problems.

2. Not durable.After a period of time, these leathers were found to have cracks on the surface and some tiny cracks appeared. After a long time, they began to peel off.

3. The feel is not good either.One characteristic of leather is that it is cool in winter and hot in summer. It is extremely uncomfortable to lean on or lie on it.

Therefore, imitation leather beds are not very good in terms of comfort or environmental protection, and have been eliminated by everyone.

4. High head and high foot of bed

A bed is divided into the head, foot and sides of the bed.

The head of the bed is usually slightly higher, for example, with a 50 cm high support backrest. The foot of the bed is usually level with the bed.

However, in order to show their personality, some beds have a very high head and a raised foot.

This type of bed is what many friends call a bed with a high head and high foot.

Suddenly, no one buys beds with high head and foot. The reasons are as follows:

1. The headrest of the bed is very uncomfortable.Because the headboard is made very high, it is upright as a whole, and it is very uncomfortable for us to lean on the headboard.

2. There is a very depressing feeling.Especially when we are lying in bed and find the head of the bed pressing down on us, we will feel very depressed and breathless.

3. The foot of the bed is about 20 to 30 centimeters higher than the bed, which is also very unreasonable.It always feels like the person is stuck in the bed and cannot move.

Therefore, many friends gave up quickly after experiencing this bed with high head and foot, which led to no one buying it.

5. Large drawer bed

In fact, beds with drawers are mainly designed to address some shortcomings of traditional floor-standing box beds or flat box beds.

Because whether it is a floor-standing box or a flat box bed, you need to remove the mattress, sheets and quilt covers before you can store items.

For a bed with drawers, you can open the drawers from the side and store items inside.

However, among the beds with drawers, there was a type of bed with very large drawers, which was also suddenly no longer available.

Why does this happen? Here are the reasons:

1. The drawer is too large and there is no way to pull it out completely.For example, some drawers are nearly one meter deep, but the distance between both sides of the bed in the bedroom is only forty to fifty centimeters, so the drawers cannot be pulled out at all.

2. It is very difficult to push and pull the drawers.Especially if there is a large drawer on each side, if there is some jam or there are some clothes stuffed inside, you will find that you can't pull it open.

3. The drawer is very easy to break.Because the hardware of the drawers installed under this type of bed are not installed very well, and the bed itself is deformed, it is found that the drawers cannot be pulled out and are broken.

Therefore, a bed with large drawers is not suitable for our bedroom. If you buy a bed with drawers, it is more reasonable to buy one with small drawers.

6. Metal Bed

In fact, at this stage, you will find that fewer and fewer people buy metal beds.

A metal bed mainly refers to a bed whose main body as well as the head and foot of the bed are all made of metal.

Metal beds mainly include traditional iron beds, as well as some alloy beds or stainless steel beds that are now appearing.

The biggest advantage of metal beds is that they are very strong.

However, metal beds have prominent problems in daily use.

The following problems with metal beds also caused a sudden lack of purchases:

1. The hand feel is very bad.Especially in the cold winter, if our arms or legs touch the metal bed, it will feel very cold and will scare us.

2. Metal beds tend to become loose and make noise.Because metal beds are basically connected by screws, if we turn over while lying on them for a long time, a squeaking sound may occur.

3. Easy to bump into.Because bedrooms are usually not very spacious, you may bump into the bed legs or sides when you walk. If they are made of wood, it is not a big deal; but if they are made of metal, it will hurt a lot.

Therefore, many friends will give up after experiencing metal beds, because metal beds are really not suitable for home use and are very uncomfortable.

7. European-style bed

A European-style bed is actually a type of bed with a particularly exaggerated shape.

Similar to European beds are French beds and palace-style beds.

In fact, these types of beds are rarely seen now. So why did no one buy them suddenly?

The biggest difference between European-style beds and ordinary beds is their shape. The head and backrest of the bed usually have very complex convex and concave shapes, and the foot of the bed also has shapes.

These shaped surfaces are generally filled with cotton products or silk cotton or other materials inside the leather.

It is precisely because of this manufacturing process and its own characteristics that I suddenly stopped buying it:

1. The internal filling is not only flammable, but also may not be environmentally friendly.Many beds are filled with doll cotton, or even recycled cotton, which is not only not environmentally friendly but also highly flammable.

2. Dust is very easy to accumulate inside the shape of the head or foot of the bed.Especially for those convex and concave textures, you will find a layer of dust inside after a few days, which will give you a headache.

3. Easy to break.This is mainly for the shape of the head and foot of the bed. After a year or so, you will find that the surface is severely worn, and even many cracks appear, and eventually peeling and cracking will occur, and the bed will become unusable.

Therefore, after experiencing European-style beds, many friends are discouraged by these complicated beds, and over time no one buys them.

When buying a bed, you need to experience it in person as much as possible, because there are many types of beds that still exist, but basically no one buys them.

In this article, we introduce 7 types of beds. Try not to buy them. If you buy a bed, try to choose a slatted frame bed or a solid wood bed, which is more practical. The simpler the shape, the more practical it will be.

(This article is compiled and edited by Qijia Anan, and the pictures are from the Internet. If there is any infringement, please let us know to delete it!)