news

한어Русский языкEnglishFrançaisIndonesianSanskrit日本語DeutschPortuguêsΕλληνικάespañolItalianoSuomalainenLatina

tooMany articles are popularizing common sense to everyone.It is too difficult to take things out of tatami, and tatami is not breathableWhen raising a problem, you need to solve it instead of avoiding it. Those who have this question are actually problems with custom design.

youMaking a traditional tatami but putting a traditional thick mattress on it is a problem in itself. It's not that there is anything wrong with the tatami. The consequence of doing this is that you can't even lift up the mattress to get something, which is time-consuming and laborious and certainly not a good idea.

oftenThe problem is that when you make a tatami, you take things from it.A 5.5 cm mattress must be used, no matter what material, it depends on your budget. At this time, you can easily pick up the mattress and take out the items. It is not troublesome.

toAs for the ventilation problem that everyone cares about most, custom-made tatami can actually solve it. The slat frame in the picture above is turned up for demonstration. In fact, it is the same as the slat frame bed you bought, which can fully meet the ventilation requirements. SoThere is no such thing as tatami being airtight. It's just that my approach is too conservative and traditional.。

whenOf course, the reason why I recommend you to buy a slatted bed instead of tatami is probably just the price. This ordinary pine bedNot only the taste is great, the quality is very poorIf you choose a slatted bed for the sake of price, it will not be worth it; not only will it not last long, but it will also lose the storage function that is most important for a house in need.

removeApart from the miscellaneous wood slatted frame beds that cost over a few hundred yuan, the ones that can be used are basically good pure solid wood, such as walnut, oak, etc., which are not only strong and durable, but also environmentally friendly, but the price is much higher than that of tatami.

RowHow to choose between a frame bed and a tatami? If it is for children to live in, artificial boards are not acceptable.

likeIf it is in the northern region, there is no humidity problem, you can do as shown above, do not take things from the top, directly make it a super large drawer with universal wheels, so you don't have to worry about the trouble of taking things from the top, taking things is simple and meets the storage needs.

likeIf friends in the south are worried about humidity, the tatami is made of slatted frames and side universal wheel drawers, which can meet the requirements of ventilation and storage.

likeIf you want to put a thick mattress on the tatami, you can also do it as shown in the picture above, perfectly embed the mattress, and then use ultra-thin pull-out drawers to meet storage needs, which is also a good approach.

likeIf you want better air permeability, you can buy a pure solid wood bed without a headboard. The quality of the pure solid wood must be tangible and visible, so that you can put a mattress on it and store things underneath. However, the price is lower than that of tatami, and the basic quality is very poor. Think about it, a bed made of pure solid wood is lower than a box made of artificial board. Your pure solid wood is not usable at all. It is either extremely weak or very thin pine wood, and its lifespan will not be long.

CautionBe cautious when buying a slatted bed with a leather-wrapped body, because you cannot see the actual material and thickness of the wood inside. Also, this kind of leather only adds pollution. There is only one possibility: to cover up the facts. Have you ever seen real solid wood hidden?

UnderstandThe best way to use a tatami or slatted bed is to use the right method and material without sacrificing functionality.

||| |

| | ||

| || |

||| |

| |||

||| |

☎24-hour decoration consultation WeChat zx029w