news

한어Русский языкEnglishFrançaisIndonesianSanskrit日本語DeutschPortuguêsΕλληνικάespañolItalianoSuomalainenLatina

IT Home reported on July 22 that NuPhy released the Nos75 customized wired mechanical keyboard on the 18th of this month.The first to be equipped with Gateron low-profile 3.0。

NuPhy Nos75 adopts ANSI 75% layout (81 keys),The top and bottom shells are made of aluminum alloyThe bottom adopts a 5° ergonomic tilt design and the highest point is 25.7mm high.

ThatSupport QMK / VIA open source key change and switch hot swap, equipped with a lower light backlight, a light strip on the side, nSA height keycaps, and a report rate of 1000Hz.

Nos75 The first release of the low-profile 3.0 jointly developed by NuPhy and GateronThe specific name of the switch is N1 nano.

This linear axis is nearly 30% shorter than the traditional high axis.Same 3.4mm total travel as the CHERRY Quicksilver switch, while being compatible with traditional high-shaft seats.

IT Home sorted out the detailed specifications of the N1 nano axis as follows:

• Made of all POM material, trigger weight is 50g, bottoming weight is 60g, trigger stroke is 1.7mm, total stroke is 3.4mm, and spring length is 18mm.

Nos75 has four structures and multiple liner fixing methods.Filling material and positioning plate material can be selected according to personal preference, achieving a unique feel and acoustic experience.

In addition, NuPhy uses aRing airbag anti-skid matReplacing the traditional feet, it can further reduce the vibration caused by typing.

NuPhy official website shows that the N1 nano switches and keycaps areThe full version of Nos75 mechanical keyboard is priced from 1302 yuan。