news

한어Русский языкEnglishFrançaisIndonesianSanskrit日本語DeutschPortuguêsΕλληνικάespañolItalianoSuomalainenLatina

IT Home reported on July 22 that ICE DOCK launched the ExpressSlot MB204MP-B four-slot M.2 solid-state drive extraction box on the 19th of this month.

The extraction box adopts the appearance of PCIe AIC add-on card, requires PCIe 6Pin auxiliary power supply, has a three-dimensional size of 204.5×21.59×126.9 (mm), supports PCIe 5.0 protocol,Provides 16GB/s PCIe 5.0×4 full-speed bandwidth for each SSD。

The ExpressSlot MB204MP-B SSD case is compatible with M.2 2230 / 2242 / 2260 / 2280 SSDs. However, the thickness of each side of these SSDs must not exceed 1.5mm, and the overall thickness must not exceed 3.8mm.

MB204MP-B adoptsDetachable design, users can easily remove the SSD tray through the quick release knob that comes with the extraction box without using additional tools.

The SSD extraction boxBuilt-in 5015 specification cooling fanEach SSD slot is equipped with a thermally conductive silicone sheet and an aluminum heat sink cover to improve the SSD cooling capacity. In addition, each hard drive slot has an independent hard drive status indicator.

ExpressSlot MB204MP-B SSD Extractor BoxNeed to be used with a motherboard that supports splitting PCIe×16 into 4×4The extractable box supports Intel VROC and AMD RAID, and can directly build RAID 0/1/5/10 arrays on the installed hard drives.

IT Home attached the specifications of the extraction box as follows: